Home Banner

LIST NO. 72

Pressure Vessels - Horizontal - Stainless Steel - Typical Arrangement Tank

Pressure Vessels - Horizontal - Stainless Steel - Typical Arrangement Tank
CONSTRUCTION Horizontal cylindrical, 2:1 semi ellipsoidal ends
DESIGN CODES EN13445/PD5500 / ASME V III
CAPACITY RANGE 0.3 to 200 cubic metres.
DESIGN PRESSURE As per Client requirements.
DESIGN S.G. As per Client requirements.
DESIGN TEMPERATURE As per Client requirements.
STRESS RELIEF If required by code or Client.
CORROSION ALLOWANCE As per Client requirements.
   
STEEL GRADES  A240 TP 316L & 304L
TESTING Hydrostatic test to code included.NDT to code.
SADDLES 2 to 5 off as required- Fully welded.
 
   
FITTINGS As per Client requirements.
   
FINISH-Internal Self Colour
FINISH-External As per Client requirements.
   
NAMEPLATE Stainless Steel , engraved
THIRD PARTY INSPECTION By Client or Integ
PED (Pressure Equipment Directive)  If for European use, and if the working pressure is above 0.5barg, then PED regulations apply.

THIRD PARTY DESIGN APPRAISAL, SURVEILLANCE & INSPECTION
All pressure vessels manufactured to EN13445/PD5500 and ASME Vlll codes must be inspected by competent Independent Insurance Authority. Order for this work is normally placed by Buyer, but Integ can arrange Inspection for code compliance

DESIGN CODE.
The listed vessels are designed to EN13445/ PD5500 Category 2, which for most applications provides the most economic vessel scantlings. For a given design, Category 1 vessels are of exactly the same thickness material but the welds are subject to 100% NDT. Category 3 vessels are only subject to visual inspection of welds and whilst some small vessels can be economically viable, this category generally results in thicker vessels due to the restricted design stress. Vessels designed to ASME Vlll can vary in thickness (+/-) when compared to the equivalent EN13445 or PD5500 vessel. Integ vessel engineers with many years of design experience and aided by the latest computer software can guide clients to achieve the optimum design code/category for a particular application.

Enquire About This Product